A good week for Crochet in Tanzania

My main blog www.steveandbarnabas.blogspot.com talked about this being a good week in Tanzania and I wanted to share how that translated into the crochet work being done.

First was the great news that as Rev. Makali was going around to set up Training classes for local pastors, he found out that news of our crochet classes at the medical clinic had spread to other areas and they were interested in having classes at the same villages as the Training classes.

Then a couple of the ladies who had gone through the classes shared some of their work:

The one of the young ladies tried to describe a cap she wanted to make.  the best I could figure out was that she wanted to make a beret type hat.  Having never done a beret and not having internet in the village I decided to just try and make one using some of the scrap yarn sent by my church in the US.  I think it actually worked out well and was the entire ball of scrap yarn.

That week I also got to make my first Frisbee from the nylon string sent by my church and a newborn hat in a dog theme.

So it was a fun week of crochet in Tanzania.

Door Handle Pocket

This idea originated from an article in Crochet World Magazine (August 2013-volume 36 number 4 page 27).  Their version was made for a standard door knob and had several pockets plus they used a stiffer nylon cord.    I have a door lever and only needed one pocket.

So I started with the security ring from a Coke Zero bottle cap and Kenyan 4 Ply Yarn and an F size needle.  I single crochet around the ring.  Normally it takes 32 single crochets to cover the ring.  

After the single crochet round I close the round with a slip stitch into the first single crochet then I chain 3 and do a round of double crochet.  After that round I close the round with a slip stitch in the first double crochet of the round and then chain 3.  Then double crochet in the first 9 stitches past the chain of 3 then chain 3.  The next row I do one double crochet in the 2nd stitch and then two double crochets into the next stitch and continue that patter across the row.  Next row I again do 1 double crochet in a stitch followed by 2 double crochets in the next stitch.  You should have 23 stitches in a row now.  

The next row I start with the chain 3 and double crochet in the second stitch and in the next 2 stithes.  Then do a half double crochet in the next 4 stitches, followed by single crochet in the next 7 stitches followed by half double crochet in the next 4 stitches and double crochet in the last 4 stitches.  This row should make it straight across instead of curved.

I do 24 rows of double crochets with no increases or decreases.  

Then I fold up the bottom 10 rows and work a double crochet through both hole in the front of the fold and the back of the fold.  I work that to the bottom and close off.  Start another line and double crochet in both holes of the front and back fold on the other side starting at the top and working down.

Chain Lace Hat

The Chain Lace Hat.  Let's start with the story of how this hat came into being (at least my version of this hat as I am sure their are others out there).  I was trying to find out what type of projects the ladies in the valley would want to learn how to make.  I was expecting practical things (or I was projecting what I thought they needed-that is a mistake missionaries make a lot).  What they asked for was unexpected.  They wanted decorative stocking caps that were more like lace in appearance but not necessarily protective.  Please understand that description went beyond my Swahili skill level and the English level of my translators.  We basically went through pictures and they said what all they liked.  It took about an hour in total.

So then I figured out how to make the various components they wanted.  In making this pattern I used Kenyan 4 ply yarn that is fairly small and an F size crochet hook.  I adjust the pattern to fit the individual head I am shooting for so gauge was not done.  This particular hat was done for a young girl (10-15 years old).  

I started at the bottom and worked to the top which is very different from most stocking caps that I do.  The ribbed band is made by chaining 11 then double crochet (dc)  in fourth from hook and dc in each chain after that for 8 sc.  Chain 3 and turn but I worked in the back loop to create the ribbed effect as I dc in each stitch back across.  I did 67 rows of this and then as I went back across I worked the dc through the original chains that started everything and the last row to join my work.

I then chained 7 and then slip stiched into the end of the fourth row.  I repeat this all the way around doing it  17 times.    The next round is chain 7 and slip stitch into the 4th chain of the previous round.  The third round is done the same as the last round.  The fourth round I do 5 chains and slip stitch into the 4 chain of the previous round again.  The fifth round is 5 chains ans slip stitch into the third chain of the previous round.  The sixth, seventh and eighth round are the same as the fifth.  The ninth round is 3 chains and slip stitch into the third chain of the previous round.  The tenth round is 3 chains and slip stitch into the 2nd chain of the previous round.  The 11th, 12th and 13th round are the same as the tenth round.  The 14th round is 1 chain and slip stitch into 2nd chain of the previous round.  The 15th round is a decreasing single crochet stitch (insert hook into first stitch and pull through a loop then insert in second stitch and pull through a loop then yarn over and pull through all three loops.  I continue this until it is closed at the top.  This would work really wear with some type of adornment at the top like a fuzzy ball or flower tied into the top.  After I close in the top I tie off and work in my threads.

It was a quick project with the majority of time on the ribbed band.  For ladies with larger hair than the girls here in Tanzania  I would recommend making it bigger in the chain stitch-possibly doing 9 chains to start with and then doing the 7 chain stitch for a while before decreasing down to hold the hair in. 

Magnet snap closures using metal bottle caps

Magnet and metal bottle cap found on road

So one of things that are difficult to get here are buttons at least in Singida.  So as I was trying to work through some projects that would require closures I looked at a couple of ideas like strings I could wrap around some type of crochet adornment or actual crochet buttons.  But then I looked at some magnets I have here for science experiments.  I thought-use washers and create a magnet closure.  Those are fine but as I was walking into town one day I saw a bottle cap for an Fanta Passion drink.  HMM!  New idea.  Bottle cap magnet closures.  As with most of my brillant ideas (laugh here if you want) I realize others have done them before and normally I go search online and give them credit but I did not find any with the first couple of looks.

Sew in Bottle cap with logo showing

So basically the idea is simple.  If I am sewing something like a backpack then I want a closure on a pocket that is not hard to open.  Then attach a bottle cap to the covering flap and the magnet to the underneath piece.  For this example I am doing it from scratch.  The sewing is a little rough because I was just trying to show the product.  Some of you with sewing machines that do things like button holes will find those work good for the top piece of the bottle cap piece.

sew magnet in between cloth pieces

Basically I fold the cloth over and sew up the sides to create the flap.  The cut a hole smaller than the bottle cap and as round as possible.  I did not do it in the exercise but to dress it up sew the edge of the circle around the bottle cap.  Then place the bottle cap inside the flap showing the face in the hole you have made then sew around the bottle cap closing both pieces of cloth to keep it in place.  Do the same thing with piece underneath except don't cut the hole to expose the magnet since it is not decorative.  Just sew it into place between the two pieces of cloth.  

The flap and underneath piece

Now they should stick together.  If your magnet is too weak to go through both pieces of cloth cut a small hole in the back of the bottle cap cloth just to make it easier for the metal to come into contact with the magnet.  Another way to make it work better is to flatten the bottle cap down at the edges.

Hard to see but the underneath piece "stuck" to flap and hanging by the magnetic connection

Coke Zero Bottle Tanzanian Doll

Trying out some different ideas based off an idea for jewelry where you crochet around rings.  When attempting this I looked around the room here in Tanzania to see what I had I could use for rings.  The security ring around the bottle neck of a Coke Zero (you know the one left after you twist your cap off).  So I had done a couple pieces of jewelry (future blogs) and thought why not start a doll dress and keep it in size with the bottle the ring came from so it could be attached back onto the bottle.  Before I get into the making of this a picture of the final product-be warned I am horrible at faces for dolls and bears.

This is already mounted back onto the bottle.  The ring with the crochet dress will only snap onto the first part of the threads not all the way back to where it used to be but that is good for the doll's head to fit on.

So I start with a security ring from a water bottle or soda.

Make a slip knot to start with and then crochet double crochets around the ring. (note you can do single just treat the ring like it is the space you insert your needle to draw the loop through the previous stitch there just is no previous stitch just the ring)

You want to fill the ring with crochet stitches so that the ring is no longer visible.

After you fill the ring, slip stitch with the first double crochet on the ring to close the circle then chain 3 for the height of your next row (if you do something over than double adjust for the correct height).  Then double crochet in a round as normal.  Note you may need to occasionally decrease stitch to keep it from becoming too wide.  On my specific pattern I did this on the dark colors because they hid it better and never on the first or the last round of a color as you can get an odd look on the color switch over.

The patter I chose to do for the doll dress was a Tanzania Flag pattern since that is where I am at.  Their color pattern is large green triangle, small yellow band, medium black band, small yellow band and large blue triangle.  For the dress I did 7 rounds of double crochet (including the original around the ring-if you do a single crochet you may want to not count that one as it will not be the same size).  2 rounds of yellow double crochet, 5 rounds of black double crochet, 2 rounds of yellow double crochet and then 7 rounds of blue double crochet.

Then the dolls head-you can do these in any patter of doll's head you want.  I did a simple head as follows:

Chain 4

slip stitch into beginning of chain. then chain 1 for height

1st round-2 each single crochets in each of the four chains

2nd round -2 each single crochets in each of the 8 single crochets

3rd round-1 single crochet in the previous round single crochet, then 2 single crochets in next single crochet of previous round-repeat for round

4th round-1 sc, 1 sc then 2 sc in the first three stitches repeat for the round

5th-7th round-1 sc all the way around (no increase)

8th round-4 each sc then a decrease stitch repeating all the way around.

At this point I stuff the head.  Since I don't have any stuffing available here and the key is to make these like they will here when I get the pattern the way I want it, I used really thing shopping bags or the plastic wrap around the toilet tissue paper.  

Now continue to decrease stitches quickly to get it to close up.  Then tie it off.  I cut a long tail on the finishing string so I can use it to center the head into the ring of the dress.

I chose to use the dress green to sew the head on to the ring but since I technically stitch from the inside of the dress (the dress is turned inside out  in pictures) it should not show but I wanted to be safe.  I stitch into the string on the back side of the ring.

The mount onto the empty bottle the ring came off of and it will stand on its own.  I want give you face or hair directions since my work here is never really that great.  

I plan to do a USA flag later using some of the white very small beads I have found to do the stars.  Will show you that one when I do it.  Will also do a different head and use single crochet.

If you don't want to do one this big it works smaller as well just go ahead an let the dress flare out as you do rounds (no decrease stitch to keep it tight)

Same basics as above just 2 rounds of green, 1 each yellow, black and yellow, then 2 round of blue.  This one decorates the top of a my plastic container I keep electronics cables in.

Hope you enjoyed

Welcome to The Yarn's Over

I want to welcome all who are joining my story here at The Yarn's Over.  First this is technically about crochet but really I will include any crafting, re-purposing stories that are fun as well.  This is about the various adventures and misadventures I have trying to be a crocheter in Tanzania while I am serving as a missionary.  As part of this adventure and a recurring story line will be the fact I started a crochet class at the ministry site after some of the school teachers and medical clinic staff saw me making things in the evening and asked I teach them how to do it.

A flyer on the Crochet Class program in Tanzania

Let's start with why I called the blog "The Yarn's Over."  It is a play on words using the common crochet term, yarn over, and the fact that there really is not a word for yarn in Swahili the native language.  There are two words in most Swahili-English dictionaries.  The first uza wa kufumia actually is talking about string but describes it in such a way that most people can guess it is actually yarn (unless you are in a store looking for it and then they just bring you string).  The second word though hadithi is actually defined as telling a story, similar to "He spins a good yarn."  So hopefully my hadithi will not be over soon but hopefully it makes sense now.

So why teach a class on crochet to folks in a country where they don't even have a word for yarn or really crochet for that matter?  They asked and I could not resist.  Also there are a lot of items in the rural area of the medical clinic and pre-school that are not available.  You would have to go to a bigger city like Singida, Tanzania to purchase a dishcloth/wash clothe, sweater, stocking cap and many other items that can easily be made by crochet.  We started small with dishcloth and wash clothes and are now moving to stocking caps.  

Stocking caps are important because the majority of kids have their heads shaved to prevent lice and other issues but this leaves their scalp exposed to a very brutal sun every day. They develop many types of dermatological issues and later in life skin cancer from this exposure.  Simply crocheting a stocking cap can help these children greatly and in the best practices of mission work, we only help them get started and they do the rest.  One of the things that has amazed me is the creativity they have shown for making other items like backpacks and purses.  So a large part of this site will be exploring other ideas they can make and use or sell.

Some of the major issues we face are the lack of materials.  Yarn and needles are only available in the largest cities, such as Arusha which for our ministry site it 1.5 hours to Singida then 6 hours on bus to Arusha.  The needles are even harder to find inside the city than the yarn since the majority of work done is on knitting machines and crochet needles are typically only used to pick the string "up"

The other big issue for me  personally has been the size of the yarn and needles.  A normal needle in the USA is a somewhere between 3.25 and 5.5 mm in size.  In Tanzania the needles range from 1.0 to 1.7 mm in size.  Yarn in the states is typically 10 ply and yarn in Tanzania is a 4 ply and considered to be about fingering weight.   Below is a picture showing the size difference.

In addition to myself, I have my long time rafiki, Barnabas Bear along for the ride.  He is part of Mauldin United Methodist Church's prayer shawl ministry where we made bears for children who were sick or had gone through a traumatic event.  Barnabas, Timothy and Phoebe became our mission bears to spread the word about what our church was doing and have their own Facebook page.  Their link is at the bottom.  To find out more about our missionary adventures and travels, check out our Steve and Barnabas Blog

Barnabas Bear

Create Your Badge